Why Your Trash Pump Stopped Working

Did you know that your trash pump is one of your home’s hardest-working equipment? It’s responsible for pumping out all the dirty water that goes down your drains, and it has to work 24/7 to keep your home clean and free of flooding.

You need to ensure that you’re taking care of your trash pump, which starts with understanding why it might stop working. There are different reasons why your trash pump has stopped working, below find the reasons:

1-When it is clogged with debris

Debris is one of the most common reasons your trash pump has stopped working. All that waste can quickly build up and clog the pump, preventing it from doing its job. To clean out the debris, you’ll need to open up the pump and remove it manually.

The process will vary depending on the pump type, but most require you to unscrew the top, remove the screen, and then clean out the debris with a brush or hose. You can also use a wet/dry vacuum to suction out any large pieces of debris.

2-If there is an airlock

An airlock is when air gets trapped in the pump, preventing it from working correctly. This can happen if the pump is installed incorrectly or if there is a leak in the system.

To fix an airlock, you’ll need to bleed the air out of the system. This is done by opening the bleed valve and letting the water run until the air has been released.

3-If the impeller is damaged

The impeller is the part of the pump that moves the water, and if it’s damaged, the pump won’t be able to do its job. In most cases, the impeller can be replaced without replacing the entire pump.

4-If the motor has burned out

The motor is what powers the pump, and if it’s burned out, the pump won’t be able to function. In most cases, you’ll need to replace the entire pump if the motor has failed.

5-If there is a power issue

If the pump isn’t getting enough power, it won’t be able to work properly. This could be due to a tripped breaker or a blown a fuse.

Check the circuit breaker or fuse box to see if there has been any issue with the power supply. If everything looks fine, the problem may be with the pump itself, and you’ll need to call a professional for assistance.

If your trash pump has stopped working, there are a few things you can do to try and fix the problem. However, if you’re unsure what the issue is or can’t seem to get the pump working again, it’s always best to call Pumpbiz for help. They’ll be able to diagnose the problem and get your pump up and running in no time.

Always remember the different ways to maintain your trash pump, including unclogging it with debris, releasing airlocks, checking if the impeller is damaged, and if the motor has burned out. These are only a few tips on maintaining your trash pump working correctly for years to come!

Related Posts